bt9110p000101a

Backrest attachment at seat adjuster of driver backrest modified

Type bt · emne 91.10 · version 0100 · 2000-02-23

Gælder for: MODEL 140 as of 1.1.94

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 91 Sæder, køjer, selestrammere › 91.10 Forsæder — Serie 140

EinPAS 37 Indvendigt udstyr › 37.26 Sæde foran › 37.26.42 ryglæn/hovedstøtte — Serie 140

BT91.10-P-0001-01A

Backrest attachment at seat adjuster of driver backrest modified

Model 140 as of 1.1.94

MODEL 140 as of 1.1.94

Modification notes

26.10.99

Replaces SI 91/52 of 18.3.94

Remove SI 91/52 from your files.

Backrest attachment at seat adjuster of driver backrest modified

P91.10-0255-01

As part of continued technical development, the driver backrest is installed with a modified backrest attachment on the seat adjuster.

Modified attachment holes on backrest hinge (3), 11.7 mm diameter reduced to 10.5 mm (arrows).

3 Backrest hinge

Backrest attachment at seat adjuster of driver backrest modified

P91.10-0254-01

Modified threaded bush on seat adjuster (2) without collar (arrows).

2 Seat adjuster

Backrest attachment at seat adjuster of driver backrest modified

P91.10-0253-01

In order to be able to attach the modified backrest to the existing seat adjuster in the event of repair work, the projecting part (collar) of the threaded bushes must be ground off (arrows).

The existing part number of the driver backrest frame has been retained.

1 Seat adjuster