bt8355p000101b

A/C compressor replaced by new version

Type bt · emne 83.55 · version 0100 · 1998-11-12

Gælder for: ENGINE 120 / in MODEL WBD129.### #F, WBD140.### #A with CODE (581a) Air conditioning (automatic) A/C compressor 10PA20

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 83 Klimatisering › 83.55 Kølemiddelkompressor

EinPAS 39 Varmesystem/ventilation/køling › 39.15 Klimatisering › 39.15.40 Kølekompressor

Gælder også for motorer/gearkasser: 120 ***

BT83.55-P-0001-01B

A/C compressor replaced by new version

ENGINE 120 /
in MODEL WBD129.### #F,
WBD140.### #A with CODE (581a) Air conditioning (automatic)
A/C compressor 10PA20

A/C compressor replaced by new version

P83.55-0216-06

A/C compressor 10PA20

1 Drive shaft
2 Cylinder housing
3 Swash plate
4 Piston
5 Valve plate
6 Intake valve
7 Pressure valve

Belt protection:
Previously the A/C compressor was switched off by the engine system control module (N16) when it became difficult to turn.
With introduction of the electro-magnetic clutch, it assumes this belt protection feature.
A melting fuse is located in the A/C compressor clutch solenoid which switches off the slipping poly-V-belt when the A/C compressor starts to lock up due the heat development. The previous slip recognition via the speed sensor in the A/C compressor is eliminated; therefore the electrical connector has only 1 pin.

The A/C compressor should be replaced completely when the melting fuse is defective due possible damage to the A/C compressor.