bt3531p001201c

Radial sealing ring and joint flange on drive pinion modified

Type bt · emne 35.31 · version 0100 · 2002-02-20

Gælder for: Rear axle center assembly dia. 198 in MODEL 129.058 as of 1.6.94, 129.059, 129.063 as of 1.6.94, 129.064, 140.02 /03 as of 1.6.94, 170.465 /466, 202.033 /093 /133 /193, 203.006 /064 /206 /264 /706, 208.365 /370 /465 /470, 210.006 /015 /017 /025 /045 /053 /055 /063 /065 /08 /206 /215 /217 /225 /245 /263 /265 /28 /606 /663, 220.063 /065 /165 Rear axle center assembly dia. 198 in MODEL 202.085 with TRANSMISSION 717 Rear axle center assembly dia. 198 in MODEL 202.134 /194, 203.004 /204, 210.007 with CO

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 35 Bagaksel › 35.31 Bagakselmidtersamling — Serie 129 (modeller 058, 059, 063, 064, 068, 076) · Serie 140 (modeller 02*, 03*) · Serie 170 (modeller 465, 466) · Serie 202 (modeller 033, 085, 093, 133, 134, 193, 194) · Serie 203 (modeller 004, 006, 064, 204, 206, 264, 706) · Serie 208 (modeller 365, 370, 374, 465, 470) · Serie 210 (modeller 006, 007, 015, 016, 017, 025, 026, 045, 053, 055, 063, 065, 070, 074, 08*, 206, 215, 216, 217, 225, 226, 245, 263, 265, 270, 274, 28*, 606, 616, 663) · Serie 215 (modeller 375, 378) · Serie 220 (modeller 026, 063, 065, 070, 075, 165, 170, 175, 178) · Serie 230 (modeller 475)

EinPAS 17 Drivstreng/aksel › 17.51 Bagaksel › 17.51.65 differentiale/akselkraftgennemføring — Serie 129 (modeller 058, 059, 063, 064, 068, 076) · Serie 140 (modeller 02*, 03*) · Serie 170 (modeller 465, 466) · Serie 202 (modeller 033, 085, 093, 133, 134, 193, 194) · Serie 203 (modeller 004, 006, 064, 204, 206, 264, 706) · Serie 208 (modeller 365, 370, 374, 465, 470) · Serie 210 (modeller 006, 007, 015, 016, 017, 025, 026, 045, 053, 055, 063, 065, 070, 074, 08*, 206, 215, 216, 217, 225, 226, 245, 263, 265, 270, 274, 28*, 606, 616, 663) · Serie 215 (modeller 375, 378) · Serie 220 (modeller 026, 063, 065, 070, 075, 165, 170, 175, 178) · Serie 230 (modeller 475)

Gælder også for motorer/gearkasser: 717 ***

BT35.31-P-0012-01C

Radial sealing ring and joint flange on drive pinion modified

As of 15.01.02

Rear axle center assembly dia. 198
in MODEL 129.058 as of 1.6.94,
129.059,
129.063 as of 1.6.94,
129.064,
140.02 /03 as of 1.6.94,
170.465 /466, 202.033 /093 /133 /193, 203.006 /064 /206 /264 /706, 208.365 /370 /465 /470, 210.006 /015 /017 /025 /045 /053 /055 /063 /065 /08 /206 /215 /217 /225 /245 /263 /265 /28 /606 /663, 220.063 /065 /165

Rear axle center assembly dia. 198 in MODEL 202.085 with TRANSMISSION 717

Rear axle center assembly dia. 198 in MODEL 202.134 /194, 203.004 /204, 210.007 with CODE (450) Taxi version

Rear axle center assembly dia. 210
in MODEL 129.068,
129.076 as of 1.2.98,
208.374, 210.016 /026,
210.070 /074 as of 1.2.98,
210.216 /226,
210.270 /274 as of 1.2.98,
210.616, 215.375 /378, 220.026 /070 /075 /170 /175 /178, 230.475
HA-Mittelstück 210E

A new radial sealing ring and a new joint flange with protection ring were phased in as of 15.01.02.

This improves the sealing at the drive pinion against dirt from outside.

If repair work means that one of the two components (new joint flange or new radial sealing ring) is replaced for the first time, then both must be replaced together.

Only then is correct sealing guaranteed.

Radial sealing ring and joint flange on drive pinion modified

P35.31-2015-11

Version as of 01.04.98 up to 14.01.02

40 Twelve-point collared nut

41 Joint flange

41k Joint flange protection ring

42 Radial sealing ring

47 Drive pinion

50 Rear axle housing

Shown on rear axle center assembly dia. 185 mm

Radial sealing ring and joint flange on drive pinion modified

P35.31-2053-11

Version as of 15.01.02 with double labyrinth seal

41 Joint flange

41k Joint flange protection ring

42 Radial sealing ring

50 Rear axle housing