Radial sealing ring and joint flange on drive pinion modified · bt3531p001201a · Mercedes-Benz WIS

BT35.31-P-0012-01A

Radial sealing ring and joint flange on drive pinion modified

Rear axle center assembly dia. 185 mm as of 01.04.98 up to 14.01.02

Rear axle center assembly dia. 210 mm as of 01.04.98



Rear axle center assembly dia. 185
in MODEL 124.003 /004 /007 /019 /022 /023 /026 /027 /030 /040 /042 /043 /050 /060 /062 /079 /082 /083 /090,
124.104 /107 as of 1.5.94,
124.127 /128 /129 /130 /131 /133 /188 /190 /191 /193 /226 /230 /290 /330 /333 /393, 129.060, 170.445 /447, 201.028 /029 /035 /036 /128, 202.020 /022 /023 /024 /025 /026 /028 /029 /080 /082 /083 /086 /089 /128 /188, 208.335 /345 /347 /435 /445 /447, 210.007 /010 /020 /035 /037 /061 /210 /235 /237 /261 /610

Rear axle center assembly dia. 185
in MODEL 124.020 /021 /080 /081 /120 /125 /126 /180 /185 /186, 201.018 /023 /024 /122 /126 as of 1.11.88,
202.018 /078 /120 /121 /122 /125 /182, 210.003 /004 with CODE (450) Taxi version

Rear axle center assembly dia. 185
in MODEL 124.186 as of 1.3.94,
202.134 /194 except CODE (450) Taxi version

Rear axle center assembly dia. 185 in MODEL 202.018 /120 /121 /125 with CODE (211a) Rear axle with automatic locking differential (ASD)

Rear axle center assembly dia. 210
in MODEL 124.008 /028 /029 /031 /032 /034 /036 /051 /052 /061 /066 /088 /091 /092,
129.058 up to 31.5.94,
129.061,
129.063 up to 31.5.94,
129.066,
140.028 /032 /033 up to 31.5.94,
140.042 /043 /063 /1,
210.070 up to 31.1.98,
210.072,
210.074 /270 up to 31.1.98,
210.272,
210.274 up to 31.1.98,
210.617

Rear axle center assembly dia. 185 in MODEL 202.085 with TRANSMISSION 722

A new radial sealing ring and a new joint flange with protection ring were phased in as of 01.04.98.

This improves the sealing at the drive pinion against dirt from outside.



If the new joint flange is installed, the new radial sealing ring must also be installed. Only then is correct sealing guaranteed.

If the new radial sealing ring is installed, the previous joint flange can continue to be used.

Radial sealing ring and joint flange on drive pinion modified

P35.31-2014-11

Version up to 31.03.98

40 Twelve-point collared nut

41 Joint flange

41k Joint flange protection ring

42 Radial sealing ring

47 Drive pinion

50 Rear axle housing

P35.31-2015-11

Rear axle center assembly dia. 185 mm, version as of 01.04.98 up to 14.01.02