Modified cone for upper ball joint to steering knuckle

P33.25-2061-10

A Steering knuckle up to chassis number 001281

B Steering knuckle as from chassis number 001282

1 Steering knuckle

2 Follower joint

3 Cone

P33.25-2060-01

The cone (3) on the steering knuckle (1) for fastening the upper ball joints (2) has been modified. In the event of a repair, the old version (A) is to be replaced with the new version (B).

The old version (A) can be recognized by the cut recess (arrow) in the area of the steering knuckle's (1) tie rod fastening.

On vehicles with the version (A), the upper ball joint (2) is also to be replaced when replacing the steering knuckle (1).

When replacing the upper ball joint (2), the steering knuckle (1) should also be replaced.

If the version (B) is installed, the steering knuckle (1) and upper ball joint (2) can be individually replaced.

Replacement parts are only available for version (B).

It is not possible to combine parts from both versions!