bt0330p000201a

Bolt for driven plate, flywheel, sheet metal two-mass flywheel standardized

Type bt · emne 03.30 · version 0102 · 1998-03-16

Gælder for: ENGINE 111 as of 1.5.95, 604 as of 1.11.95, 605, 606 as of 1.5.95

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 03 Drivværk › 03.30 Svinghjul, medbringerskive, torsionsdæmper, startertandkrans

EinPAS 15 Motor › 15.15 forbrændingsmotor komplet/motorblok/krumtapdrev › 15.15.41 Krumtapaksel/svinghjul/medbringerskive

Gælder også for motorer/gearkasser: 111 ***, 604 ***, 605 ***, 606 ***

ENGINE 111 as of 1.5.95,
604 as of 1.11.95,
605, 606 as of 1.5.95

BT03.30-P-0002-01A

Bolt for driven plate, flywheel, sheet metal two-mass flywheel standardized

ENGINE 111, 604, 605, 606

Bolt for driven plate, flywheel, sheet metal two-mass flywheel standardized
Bolt for driven plate, flywheel, sheet metal two-mass flywheel standardized

P03.30-0243-01

P03.30-0242-01

Stretch shank bolt (A) part no.
102 032 00 71 is replaced by an internal torx bolt (B) T55 part no. 111 990 03 12.

The internal torx bolt (B) T55 should be replaced when performing repairs.

Length (L) bolt (A)=22 mm

Length (L) bolt (B)=28.5mm