Engine | 372.961 in model 682 |
Engine | 376.90 in model 382 |
Engine | 376.90 in model 384 |
Engine | 376.90 in model 386 |
Engine | 376.930 in model 682 |
Engine | 376.94 in model 382 |
Engine | 376.94 in model 384 |
Engine | 376.94 in model 386 |
Engine | 376.94 in model 682 |
Engine | 376.95 in model 382 |
Engine | 376.95 in model 384 |
Engine | 376.95 in model 386 |
Engine | 376.95 in model 682 |
Engine | 376.96 in model 384 |
Engine | 376.97 in model 382 |
Engine | 376.97 in model 384 |
Engine | 376.97 in model 685 |
Engine | 376.984 in model 682 |
Engine | 376.986 in model 386 |
Engine | 376.99 in model 384 |
Engine | 377.94 in model 382 |
Engine | 377.94 in model 384 |
Engine | 377.94 in model 693 |
Engine | 377.94 in model 694 |
Engine | 377.96 in model 382 |
Engine | 377.96 in model 693 |
Engine | 377.96 in model 695 |
Engine | 377.97 in model 384 |
Engine | 377.98 in model 382 |
Engine | 377.98 in model 693 |
Engine | 377.98 in model 695 |
Flywheel, drag disk |
Number | Designation | Engine 372.961, 376.906/907/908/909/930/945/950/955/956/958/962 | Engine 376.941/946/947/951/952/953/954/964/967/972/976/977/984/986/993/995/997, 377.940/941/942/943/944/945/960/964/968/972/973/980/981/983/984/985 | ||
BE03.30-B-1001-01C | Diameter (A) of the rack housing | mm | 335,390 - 335,530 | 360,435 - 360,575 | |
BE03.30-B-1002-01C | Inside rack diameter | mm | 334,690 - 334,830 | 359,690 - 359,830 | |
BE03.30-B-1003-01C | Interference between the gear rack and flywheel | mm | 0,560 - 0,840 | 0,605 - 0,885 | |
BE03.30-B-1004-01C | Diameter (B) in the flange to the crankshaft | mm | 130,000 - 130,040 | 130,000 - 130,040 | |
BE03.30-B-1005-01C | Distance (C) between the friction surface and the contact surface with the crankshaft | New flywheel | mm | 37,9 - 38,1 | 37,9 - 38,1 |
Minimum after grinding | mm | 36,5 | 36,5 | ||
BE03.30-B-1006-01C | Total thickness (D) of the flywheel | mm | 51,5 | 51,5 | |
BE03.30-B-1007-01C | Diameter (E) of the clutch housing | mm | 365,000 - 365,057 | 395,000 - 395-057 | |
BE03.30-B-1008-01C | External diameter (F) of the flywheel | mm | 375 | 403 | |
BE03.30-B-1009-01C | Diameter (H) of the bearing housing | mm | 78,000 - 78,046 | 78,000 - 78,046 | |
BE03.30-B-1010-01C | Maximum permissible flywheel runout (measured in the gear rack seat surface) | mm | 0,10 | 0,10 | |
BE03.30-B-1011-01C | Maximum allowable side deviation of the flywheel friction surface | mm | 0,10 | 0,10 | |
BE03.30-B-1012-01C | Maximum allowable side deviation of the rack | mm | 0,50 | 0,50 | |
BE03.30-B-1013-01C | Maximum length for the bolts reuse | mm | 26,3 | 26,3 | |
BE03.30-B-1014-01C | Flywheel working face finishing roughness, Rz | mm | 0,016 | 0,016 | |
BE03.30-B-1015-01C | Rack assembly temperature | Graus | 250 - 280°C | 250 - 280°C | |
BE03.30-B-1016-01C | Maximum dynamic unbalancing, at 1000/min | Ncm | 0,2 | 0,2 |
Flywheel, drag disk |
Number | Designation | Engine 377.961/962 | ||
BE03.30-B-1001-01C | Diameter (A) of the rack housing | mm | 392,435 - 392,575 | |
BE03.30-B-1002-01C | Inside rack diameter | mm | 392,000 - 392,140 | |
BE03.30-B-1003-01C | Interference between the gear rack and flywheel | mm | 0,315 - 0,575 | |
BE03.30-B-1004-01C | Diameter (B) in the flange to the crankshaft | mm | 130,000 - 130,040 | |
BE03.30-B-1005-01C | Distance (C) between the friction surface and the contact surface with the crankshaft | New flywheel | mm | 37,9 - 38,1 |
Minimum after grinding | mm | 36,5 | ||
BE03.30-B-1006-01C | Total thickness (D) of the flywheel | mm | 51,5 | |
BE03.30-B-1007-01C | Diameter (E) of the clutch housing | mm | 435,000 - 435,063 | |
BE03.30-B-1008-01C | External diameter (F) of the flywheel | mm | 443,6 - 444,0 | |
BE03.30-B-1009-01C | Diameter (H) of the bearing housing | mm | 78,000 - 78,046 | |
BE03.30-B-1010-01C | Maximum permissible flywheel runout (measured in the gear rack seat surface) | mm | 0,10 | |
BE03.30-B-1011-01C | Maximum allowable side deviation of the flywheel friction surface | mm | 0,10 | |
BE03.30-B-1012-01C | Maximum allowable side deviation of the rack | mm | 0,50 | |
BE03.30-B-1013-01C | Maximum length for the bolts reuse | mm | 26,3 | |
BE03.30-B-1014-01C | Flywheel working face finishing roughness, Rz | mm | 0,016 | |
BE03.30-B-1015-01C | Rack assembly temperature | Graus | 250 - 280°C | |
BE03.30-B-1016-01C | Maximum dynamic unbalancing, at 1000/min | Ncm | 0,2 |