Repair materials
Number | Designation | Order number |
BR00.45-Z-1014-01A | Adhesive tape | A 000 989 98 85 |
W83.70-1032-01
1 Lay out floor covering in bunk frame.
2 Install exhaust stack (1) in passage in cab floor and mark four mounting holes on floor covering.
The notch in the exhaust stack flange should point toward the front of the vehicle.
3 Remove exhaust stack from vehicle floor.
4 Drill through floor covering and cab floor at marked points with 2.5 mm dia. bit.
5 Reinstall exhaust stack in passage and fasten with four sheet metal screws.
W83.70-1033-01
6 Seal exhaust stack all the way around below cab with sealant.