Serier
da
az8285w200902a
Prepare cover
Type az · emne 82.85 · version 0100 · 2016-08-16
Gælder for: Model 940, 942, 943, 944 with body 944.890 Model 950.5/6, 952.5/6, 953.6, 954.5 with body 940.890 Model 970, 972, 974, 975, 976 with body 972.890
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 3 Karrosseri › 82 El-system, karrosseri › 82.85 Navigations- og kommunikationssystemer — Serie 940 · Serie 942 · Serie 943 · Serie 944 · Serie 950 (modeller 5**, 6**) · Serie 952 (modeller 5**, 6**) · Serie 953 (modeller 6**) · Serie 954 (modeller 5**) · Serie 970 · Serie 972 · Serie 974 · Serie 975 · Serie 976
EinPAS 31 Kommunikation/information/underholdning › 31.20 Flådestyringssystem/pejling › 31.20.3 eftermontering/ombygning — Serie 940 · Serie 942 · Serie 943 · Serie 944 · Serie 950 (modeller 5**, 6**) · Serie 952 (modeller 5**, 6**) · Serie 953 (modeller 6**) · Serie 954 (modeller 5**) · Serie 970 · Serie 972 · Serie 974 · Serie 975 · Serie 976
AZ82.85-W-2009-02A
Prepare cover
Prepare drilling template for FleetBoard bracket trim cutout
WF58.50-W-8285-01NA
Model
940, 942, 943, 944 with body 944.890
Model
950.5/6, 952.5/6, 953.6, 954.5 with body 940.890
Model
970, 972, 974, 975, 976 with body 972.890
1
Place drilling template (1) onto panel (2), align with reference edges (a and b) and fix in place using adhesive tape (arrows).
2
Transfer drilling center points of drilling template (1) onto panel (2) using a scriber.
3
Remove drilling template (1).
4
Drill holes with specified diameters.
Diameters of holes are listed in document "Prepare drilling template for FleetBoard bracket panel cutout".
5
Cut out panel (2) at contours, as shown.
6
Cut off retaining lug at retaining plate (3) (arrow).
7
Position retaining plate (3) from below onto panel (2) and mount using screw/ bolt (4).
If necessary, rework panel (2) at cutouts.
