W82.85-1586-11
1 Make cutout (2) in bracket (1) for Fleetboard vehicle computer using a suitable tool.
The cutout (2) is required for leading through the connection lines for the Fleetboard vehicle computer.
2 Drill holes (arrows) with dia. of 5 mm.
The holes (arrows) are needed to secure the connection lines of the Fleetboard vehicle computer.
a 30 mm
b 15 mm
W82.85-1588-11
3 Place bracket (1) for Fleetboard vehicle computer against front panel of stowage compartment at passenger side in such a way that the bracket (1) is supported on the edge (3) at the bottom and the mounting brackets (5, 6) are centrally located on the bead (4).
4 Make marks on wall of stowage compartment through mounting holes (arrows) in bracket (1) of Fleetboard vehicle computer.
5 Remove bracket (1) for Fleetboard vehicle computer from stowage compartment and drill holes with dia. 5.5 mm in marked locations.
6 Secure bracket (1) for Fleetboard vehicle computer to wall of stowage compartment with bolts M515.