Connect and install FleetBoard vehicle computer

Type az · emne 82.85 · version 0101 · 2007-03-08

Gælder for: MODEL 940, 942, 943, 944 with BODY 944.890 except CODE (DD5) Cab with high roof except CODE (EX3) Telematics preinstallation with CODE (EX8) Preinstallation for distance-related toll calculation MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 with BODY 940.890 except CODE (DD5) Cab with high roof except CODE (EX3) Telematics preinstallation with CODE (EX8) Preinstallation for distance-related toll calculation MODEL 970, 972, 974, 975, 976 with BODY 972.890 except CODE (DD5) Cab with high roof except CODE (EX3)

Ikke tilgængelig på “da”; vises på Engelsk.

AZ82.85-W-2006-01E

W82.85-1541-11

1 Route GPS antenna line (5), GSM antenna line (6) and the wiring harness for the FleetBoard with FleetBoard connector (X126) through the upper slot of the assembly frame (dual DIN slot) (3).

2 Connect the FleetBoard vehicle computer wiring harness (8) to the FleetBoard connector (X126).

3 Cut GPS antenna line (5) and GSM antenna line (6) to the length of the electrical wiring harness (8) and secure to electrical lines using cable ties on either side of FleetBoard connector (X126).

W82.85-1580-11

4 Connect GPS antenna line (5) and GSM antenna line (6) to FleetBoard vehicle computer (2).

 Pay attention to color coding.

5 Connect FleetBoard vehicle computer connector (P502) of FleetBoard vehicle computer wiring harness (8) to FleetBoard vehicle computer (2).

 The designation of the FleetBoard vehicle computer connector (P502) is found on both the wiring harness for the FleetBoard vehicle computer (8) and the FleetBoard vehicle computer (2).

6 Slide FleetBoard vehicle computer (2) into assembly frame (dual DIN slot).

 Ensure FleetBoard vehicle computer (2) is correctly latched in assembly frame.