W82.85-1564-11
1 Mark drilling positions (2) on contact surface in center of instrument panel.
2 Drill dia. 20 mm holes at the drilling positions (2) using a multi-stage drill.
3 Cut off the overhanging areas between the holes (3).
a 65 mm
b 20 mm
c 15 mm
W82.85-1594-06
4 Route DispoPilot wiring harness (7) through hole (4) from stowage compartment at passenger side into cab interior.
5 Route Fleetboard DispoPilot wiring harness (7) along cab floor to front passenger footwell.
W82.85-1585-11
6 Route Fleetboard DispoPilot wiring harness (7) from front passenger footwell along cab main wiring harness to contact surface in center of instrument panel.
7 Route Fleetboard DispoPilot wiring harness (7) through opening (8) in contact surface in center of instrument panel.