Prepare FleetBoard Telematics platform for installation

Type az · emne 82.85 · version 0201 · 2007-03-08

Gælder for: MODEL 940, 942, 943, 944 with BODY 944.890 with CODE (EX3) Telematics preinstallation except CODE (EX8) Preinstallation for distance-related toll calculation MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 with BODY 940.890 with CODE (EX3) Telematics preinstallation except CODE (EX8) Preinstallation for distance-related toll calculation MODEL 970, 972, 974, 975, 976 with BODY 972.890 with CODE (EX3) Telematics preinstallation except CODE (EX8) Preinstallation for distance-related toll calculation

Ikke tilgængelig på “da”; vises på Engelsk.

AZ82.85-W-1000-01F

Modification notes

12.4.05

Steps 9 to 12 deleted.

Prepare FleetBoard Telematics platform for installation

W82.85-1450-11

1 Remove coverings (7).

W82.85-1581-11

2 Insert installation frame for FleetBoard vehicle computer (4) into upper slot of assembly frame (dual DIN slot) (3).

3 Route the GPS antenna line (5), GSM antenna line (6) and FleetBoard connector (X126) for the FleetBoard wiring harness preinstallation through the upper slot of the assembly frame (dual DIN slot) (3).

4 Connect the FleetBoard vehicle computer wiring harness (8) to the FleetBoard connector (X126).

5 Attach GPS antenna line (5) and GSM antenna line (6) using cable ties (arrows) before and after the FleetBoard connector (X126) to the electrical lines.

 Cut the GPS antenna line (5) and GSM antenna line (6) to match the length of the FleetBoard vehicle computer wiring harness (8).

W82.85-1453-11

6 Mount covering (7) onto lower assembly opening.