az8264d000107a

Retrofitting CD changer in seat frame

Type az · emne 82.64 · version 0100 · 2006-10-31

Gælder for: MODEL 901, 902, 903, 904, 905 with CODE (EF6) Radio Sound 20 with CODE (EF7) Radio Sound 30 with CODE (ET8) Sound 30 Auto-Pilot-System (APS)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 82 El-system, karrosseri › 82.64 CD-omskifter — Serie 901 · Serie 902 · Serie 903 · Serie 904 · Serie 905

EinPAS 31 Kommunikation/information/underholdning › 31.67 Medieafspilning/datamedie › 31.67.3 eftermontering/ombygning — Serie 901 · Serie 902 · Serie 903 · Serie 904 · Serie 905

AZ82.64-D-0001-07A

Retrofitting CD changer in seat frame

Model 901, 902, 903, 904, 905 with CODE EF6, EF7, ET8 (Radio Sound 20, 30 or 30 APS)

Repair materials

Number

Designation

Order number

BR00.45-Z-1014-01A

Adhesive tape

A 000 989 98 85

Retrofitting CD changer in seat frame

D82.64-1104-01

1 Install retaining brackets (1) on CD changer (2) with two screws each.

Retrofitting CD changer in seat frame

D82.64-1105-01

2 Position CD changer on floor of seat frame and align with side access opening.

When aligning CD changer observe removal and installation of CD magazine. Ensure that there is sufficient space in the area of the side access opening.

3 Mark two mounting holes each for retaining brackets on the floor.

4 Drill cab floor with 3.5 mm bit at marked points.

5 Screw CD changer to vehicle floor with sheet metal screws.

Coat threads of sheet metal screws with sealant before screwing in to protect against water and corrosion.