az8264d000101a

Retrofitting CD changer wiring harness

Type az · emne 82.64 · version 0100 · 2001-05-10

Gælder for: MODEL 901, 902, 903, 904, 905 with CODE (EF6) Radio Sound 20 with CODE (EF7) Radio Sound 30

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 82 El-system, karrosseri › 82.64 CD-omskifter — Serie 901 · Serie 902 · Serie 903 · Serie 904 · Serie 905

EinPAS 31 Kommunikation/information/underholdning › 31.67 Medieafspilning/datamedie › 31.67.3 eftermontering/ombygning — Serie 901 · Serie 902 · Serie 903 · Serie 904 · Serie 905

AZ82.64-D-0001-01A

Retrofitting CD changer wiring harness

Model 901, 902, 903, 904, 905 with CODE EF6, EF7 (Radio Sound 20 or 30)

Retrofitting CD changer wiring harness

D82.64-1102-02

1 Route wiring harness (1) for CD changer for connecting to plug location C of radio upward below instrument panel and route connector out of radio installation shaft.

2 Route wiring harness (1) for CD changer for connecting to CD changer on cab floor toward rear and route into seat frame at side.

Connect wiring harness to present leads and wiring harnesses and route on cab floor in gap between insulating mats glued on. Fasten wiring harness to cab floor with strips of adhesive tape.Avoid chafing points, if necessary install chafe guard.