Installing transport foil

Type ar · emne 97.20 · version 0111 · 2009-04-22

Gælder for: MODEL 129, 163, 168, 170, 202, 203, 204, 208, 209, 210, 211, 212, 215, 220, 230, 240, 414 with CODE (524) Paint protection

Ikke tilgængelig på “da”; vises på Engelsk.

AR97.20-P-4000A

17.4.09

MODEL 129, 163, 168, 170, 202, 203, 204, 208, 209, 210, 211, 212, 215, 220, 230, 240, 414 with CODE (524) Paint protection

	Notes on transportation sheeting	Model 129, 163, 168, 169, 170, 202, 203, 204, 208, 209, 210, 211, 212, 215, 220, 230, 240, 414	AH97.20-P-9409-03A
1	Remove old transport foil	 If old transport foil is present. Using heat simplifies removal of transport foil. Do not heat transport foil too much to prevent paint damage
2	Clean vehicle	 Dry wet vehicles with chamois.
3	Check paint surface on vehicle	 Visible adhesive tape marks from repainting can remain because they are removed before the vehicle is shipped.
		It is not necessary to take swelling into consideration when repainting. The new transport foil can be installed on these paint surfaces
4	Install new transport foil by hand	 Do not mask plastic parts and rubber profiles not with new transport foil