Cavity preservation following repair work · ar9720p1500pb · Mercedes-Benz WIS

AR97.20-P-1500PB

Cavity preservation following repair work

15.11.11

MODEL 203.7

P97.20-2136-01

Engine hood

Front wheel well

P97.20-2137-01

P97.20-2138-09

Longitudinal member left and right rear wheel well

P97.20-2141-09

Longitudinal member front end and underbody

P97.20-2152-11

Door

P97.20-2153-09

Cross member above rear axle and liftgate

P63.20-2895-06

Openings for cavity preservation

A Cavity preservation opening
(upper outer B-pillar reinforcement)

B Cavity preservation opening
(center outer B-pillar reinforcement)

C Cavity preservation opening
(outer reinforcement)

 Danger!	Risk of explosion and poisoning caused by solvent vapors and gasses. Risk of injury to skin and eyes when handling anticorrosion agents.	Never spray anticorrosion agents on flames or glowing hot objects and keep them well away from all potential sources of ignition. Use them only in well-ventilated rooms; wear respiratory protection.	AS97.00-Z-0001-01A
	Notes on cavity preservation		AH97.20-P-0001-01B
	Processing instructions for cavity preservation agent		AP97.20-P-0640-01A
	Cavity protection, general		GF98.00-P-2045A
1	Perform repair preservation	 Apply preservation agent from inside in marked areas following sealing and paintwork, however, before performing assembly work The processing temperature should not be less than 15 °C.
		Additional preservation measures may be required, depending on the repair area, deviating from the standard cavity preservation shown.
		The spraying hose should be stiff and the nozzles should spray at angle to the front and rear. The cavities should be dry. Insert spray hoses as far as possible into hollow cavities. Spray while inserting and pulling out slowly.
		Apply repair preservation agent twice after a drying time of 5 minutes in between.
		After replacing B-pillar, supplement cavity preservation through cavity preservation openings (A, B, C).
		Combination pressure spray gun (corrosion protection) gotis://K_91-97_01.0
		Preservation agent	*BR00.45-Z-1003-05A
2	Remove cavity sealant from drain holes

Repair materials

Number	Designation	Order number
BR00.45-Z-1003-05A	Cavity sealant, solvent-free (1 l container)	A 000 986 72 70 05

ah9720p000101b Oplysninger om hulrumskonservering
ap9720p064001a Bearbejdningsoplysninger i forbindelse med hulrumskonservering
as9700z000101a Eksplosionsfare og fare for forgiftning på grund af opløsningsmiddeldampe og gasser. Fare for personskade på øjne og hud ved bearbejdning af rustbeskyttelsesmiddel
gf9800p2045a