Insert plastic plugs and rubber grommets with sealing compound.
Keep thread of welding nuts and threaded bolts free from sealant by masking with tape or by covering with cardboard sleeves. Also keep contact surfaces for axle mounts, windows and detachable body components free of sealant.
Seal spot welding flange on both sides, where accessible. If accessible from one side only seal corresponding surface.
Observe standard seals!
P97.10-2129-06
Inner side floor (right and left) and right underfloor, area of tow clamp
P97.10-2132-06
D-pillar, taillamp cutout and rear end center assembly