Seam sealing following repair, side damage

AR97.10-D-4000-03TS

Seam sealing following repair, side damage

Model

907, 910

Repair materials

Number

Designation

Order number

BR00.45-Z-1003-01A

White sealing compound, 310 ml, DBL 6069.20

A 001 989 63 20

BR00.45-Z-1041-01A

Seam sealant, sprayable 310 ml

A 002 989 84 20

1

Seal body flanges of repaired area with sealant and spot welds and rivets of repaired area with seam sealant material.

 Seal repaired body flanges and reset spot welds and rivets.
Leaks and corrosion can otherwise occur.

 Use appropriate processing variant for seam seals.

 Insert plastic plugs and rubber grommets with sealant.

 Observe standard sealing. Seal only primed body parts.

 Keep sealant out of threads on weld nuts and threaded pins by masking off or covering with cardboard sleeves. Also keep drain openings and contact surfaces of affected axle attachments, detachable parts and glass panes free from sealant. Seal accessible spot weld flanges on both sides. Where only accessible from one side, only seal accessible area.

Processing variants for seam seals

A

Pulling or wiping off

B

Sealing or smoothing

Front area and center side wall area, shown on model 907 on left side of vehicle

Sidewall paneling area, shown on rear left

Rear area, shown on rear

Rear area, shown on right rear

Front area and sliding door cutout, shown on model 907 on right side of vehicle

Sliding door entrance, shown on right sliding door

Front area, shown on model 910 on left side of vehicle

Front area, shown on model 910 on right side of vehicle

Underbody area, shown on model 907

Underbody area, shown on model 910