ar9430p5300rt

Remove/install bottom sections of soundproofing

Type ar · emne 94.30 · version 0101 · 2006-07-20

Gælder for: MODEL 251 with ENGINE 642

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 94 Karrosseristøj, lyddæmpning › 94.30 Støjkapsel — Serie 251

EinPAS 35 Karrosseri/ramme/monteringsdele › 35.25 dæmpningselement/afdækning forneden/tætning/undervognsbeklædning › 35.25.41 undervognsbeklædning/støjindkapsling/undervognsbeklædning — Serie 251

Gælder også for motorer/gearkasser: 642 ***

AR94.30-P-5300RT

Remove/install bottom sections of soundproofing

17.7.06

MODEL 251 with ENGINE 642

Remove/install bottom sections of soundproofing

P61.20-2055-01

Shown on vehicles without USA version, code 494

1 Front bottom section of soundproofing

2 Rear bottom section of soundproofing

Remove/install bottom sections of soundproofing

P61.20-2054-11

Shown on bottom sections of soundproofing, on vehicles without USA version, code 494

1 Front bottom section of soundproofing

2 Rear bottom section of soundproofing

3 Bolts

4 Bolts

5 Washers

Remove/install

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

1

Lift vehicle with two-post lift

AR00.60-P-1000RT

2.1

Remove bolts (4)

Except vehicles with USA version,
code 494.

8 bolts (4).

3.1

Remove rear bottom section of soundproofing (2).

Except vehicles with USA version,
code 494.

Do not loose washers (5) when removing rear bottom section of soundproofing (2). Ensure that washers (5) are seated correctly when installing.

4

Remove bolts (3)

6 bolts (3).

5

Remove front bottom section of soundproofing (1).

6

Install in the reverse order

Henviste dokumenter