ar9430p5300m

Remove/install bottom parts of noise encapsulation

Type ar · emne 94.30 · version 0102 · 2003-09-29

Gælder for: MODEL 220 with ENGINE 613, 628, 648

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 94 Karrosseristøj, lyddæmpning › 94.30 Støjkapsel — Serie 220 · Serie 613 · Serie 628 · Serie 648

EinPAS 35 Karrosseri/ramme/monteringsdele › 35.25 dæmpningselement/afdækning forneden/tætning/undervognsbeklædning › 35.25.41 undervognsbeklædning/støjindkapsling/undervognsbeklædning — Serie 220 · Serie 613 · Serie 628 · Serie 648

AR94.30-P-5300M

Remove/install bottom parts of noise encapsulation

16.11.01

MODEL 220 with ENGINE 613, 628, 648

Remove/install bottom parts of noise encapsulation

P94.30-2013-06

1 Sound-proofing capsule bottom section, right

2 Sound-proofing capsule bottom section, left

3 Sound-proofing capsule bottom section, center

4 Sound-proofing capsule bottom section, rear

5 Screw

Remove

Danger!

Lethal injuries are possible if vehicle slips off of lifting platform

Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

1

Raise vehicle with lifting platform

2

Unscrew screws (5) and remove sound-proofing capsule bottom sections (1, 2, 3, 4)

Observe removal sequence of paneling parts: First remove center paneling section (3).

Install

3

Install sound-proofing capsule bottom sections (1, 2, 3, 4).

Install right and left front sound-proofing capsule bottom section (1, 2), so that their rubber lip is covered by bumper.

Henviste dokumenter