S91.60-A005-08
Shown on right side of vehicle |
1 | Nut | B164/2 | Left C-pillar body acceleration sensor | B164/3 | Right C-pillar body acceleration sensor | ||
3 | Electrical connector |
Topical note | Notes on carrying out repair work in the vehicle interior | ||
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Remove ground line of battery. | ||
2 | Remove respective lower C-pillar trim. | ||
3 | Remove nut (1). | ||
Topical note | Notes on self-locking nuts and bolts | ||
Nut, acceleration sensor to C-pillar | |||
4 | Remove left C-pillar body acceleration sensor (B164/2) or right C-pillar body acceleration sensor (B164/3) from C-pillar and disconnect electrical connector (3). | ||
5 | Install in the reverse order. | ||
| Check | ||
6 | Check Supplemental Restraint System (SRS) using vehicle diagnosis system. | If left C-pillar body acceleration sensor (B164/2) or right C-pillar body acceleration sensor (B164/3) was replaced. | |
|
Henviste dokumenter
- ad0000s200006p
- ah0000n000101a Oplysninger om selvlåsende bolte og møtrikker
- ah5400p000101a Oplysninger med henblik på at undgå skader på elektroniske komponenter på grund af elektrostatisk afladning
- ah6800n000101s Oplysninger om udførelse af reparationsarbejde i kabinen
- ar5410s0003p
- ar6830s4494p