S91.60-A004-09
Shown on right side of vehicle |
2 | Electrical connector | B164 | Left B-pillar body acceleration sensor | |
3 | Nut | B164/1 | Right B-pillar body acceleration sensor | |
4 | Bracket |
Topical note | Notes on carrying out repair work in the vehicle interior | ||
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Detach ground line of on-board electrical system battery. | ||
2 | Remove respective front door sill. | ||
3 | Lift floor covering in area of left B-pillar body acceleration sensor (B164) or right B-pillar body acceleration sensor (B164/1). | ||
4 | Disconnect electrical connection (2). | ||
5 | Remove nut (3). | ||
Topical note | Notes on self-locking nuts and bolts | ||
Nut, acceleration sensor for entrance area to holder | |||
6 | Unclip left B-pillar body acceleration sensor (B164) or right B-pillar body acceleration sensor (B164/1) from holder (4) and remove. | ||
7 | Install in the reverse order. | ||
| Check | ||
8 | Check Supplemental Restraint System (SRS) using vehicle diagnosis system. | If the left B-pillar body acceleration sensor (B164) or right B-pillar body acceleration sensor (B164/1) was replaced. | |
|
Henviste dokumenter
- ad0000s200006p
- ah0000n000101a Oplysninger om selvlåsende bolte og møtrikker
- ah5400p000101a Oplysninger med henblik på at undgå skader på elektroniske komponenter på grund af elektrostatisk afladning
- ah6800n000101s Oplysninger om udførelse af reparationsarbejde i kabinen
- ar5410s0003p
- ar6830s4101p