Remove/install driver knee airbag

AR91.60-S-0200P

Remove/install driver knee airbag

25.11.2019

Model

470, 471

1

Driver kneebag

4

Connector socket

2

Bolts

4.1

Fuse

3

Bracket

 Warning

Risk of injury during testing and repair operations related to pyrotechnical components

Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such component parts.

AS91.00-Z-0008-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Information, assessment and legal requirements when working with, handling and storing pyrotechnical components

AH91.00-Z-0000-10A

 

Remove/install

1

Disconnect battery ground line

AR54.10-S-0003P

2

Remove bottom paneling for dashboard on driver side

AR68.10-S-1501P

3

Remove screws (2)

 Installation: Ensure that the brackets (3) do not turn when tightening the screws/bolts (2).

 Bolt, knee airbag to crossmember for instrument panel

*BA91.60-N-1002-01P

4

Unhook brackets (3) upwards and remove

5

Unhook driver knee airbag (1) upward out of brackets of crossmember

6

Unlock fuse (4.1) using a suitable tool

7

Remove connector socket (4) from driver knee airbag (1) and remove driver knee airbag (1) from vehicle

8

Install in the reverse order



Check

9

Check Supplemental Restraint System (SRS) with diagnostic system



AD00.00-S-2000-06P

 Airbag

Number

Designation

Model 471

Model 470

BA91.60-N-1002-01P

Bolt, knee airbag to crossmember for instrument panel

Nm

10

10