ar9160p0920ew

Remove/install engine hood clamping lever

Type ar · emne 91.60 · version 0102 · 2011-04-28

Gælder for: MODEL 204.3, 207, 212 with CODE (U60) Pedestrian protection

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 91 Sæder, køjer, selestrammere › 91.60 Airbag, fodgængerbeskyttelse — Serie 204 (modeller 3**) · Serie 207 · Serie 212

EinPAS 27 Passive sikkerhedssystemer › 27.35 Fodgængerbeskyttelse › 27.35.20 Servomotor/indstillingsled/cylinder — Serie 204 (modeller 3**) · Serie 207 · Serie 212

AR91.60-P-0920EW

Remove/install engine hood clamping lever

19.4.11

MODEL 204.3, 207, 212 with CODE (U60) Pedestrian protection

Remove/install engine hood clamping lever

P91.60-3898-06

Shown on model 212

1 Lock

2 Clamping lever

3 Engine hood hinge

Remove/install

Danger!

Risk of injury caused by fingers being pinched or crushed when removing, installing or aligning hoods, doors, trunk lids, liftgates or sliding roof

Keep body parts and limbs well clear of moving parts.

AS00.00-Z-0011-01A

Danger!

Risk of injury caused by body parts being pinched or crushed when working on gas-filled struts under tension

Only remove and install gas-filled struts when they are not under tension and when the components are properly secured.

AS00.00-Z-0012-01A

1

Open lock (1) at clamping lever (2)

2

Remove clamping lever (2) from engine hood hinge (3)

3

Install in the reverse order

Henviste dokumenter