Removing, installing windowbag

AR91.60-P-0693LWE

Removing, installing windowbag

25.04.2018

Model

213

Shown on left side of vehicle on model 213.0

1

Window airbag

3

Screw

2

Electrical connector

4

Clips

4

Clip

 Warning

Risk of injury during testing and repair operations related to pyrotechnical components

Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such component parts.

AS91.00-Z-0008-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Information, assessment and legal requirements when working with, handling and storing pyrotechnical components

AH91.00-Z-0000-10A

 

Remove/install

1

Put left front seat into horizontal position

When removing the right windowbag (1).

2

Put right front seat into horizontal position

When removing the left windowbag (1).

3

Disconnect ground line to battery

AR54.10-P-0003LW

4.1

Remove headliner and set down on seats

Model 213.0/1

AR68.30-P-4300LWE

4.2

Remove headliner

Model 213.2

AR68.30-P-4300LWS

5

Release and disconnect electrical connection (2)

 Installation: Make sure that electrical connector (2) engages properly.

6

Unscrew bolt (3)

 Bolt, holder for windowbag gas generator to A-pillar/roof frame

*BA91.60-P-1004-01O

7

Use pliers and put through the openings (arrows A) to press tabs (arrows B) together and remove clamps (4)

 Model 213.1
A further clamp (4) is installed in the area of the C-pillar.

8

Unhook gas generator and remove windowbag (1)

9

Install in the reverse order

10

Check Supplemental Restraint System (SRS) with diagnostic system

When replacing the windowbag (1).



AD00.00-P-2000-04B

 Airbag

Number

Designation

Model 213

BA91.60-P-1004-01O

Bolt, holder for windowbag gas generator to A-pillar/roof frame

Nm

6