ar9145p1000ec

Remove/install seatbelt extender.

Type ar · emne 91.45 · version 0201 · 2009-12-18

Gælder for: MODEL 207.3 /4

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 91 Sæder, køjer, selestrammere › 91.45 Selefremfører — Serie 207 (modeller 3**, 4**)

EinPAS 27 Passive sikkerhedssystemer › 27.17 Sikkerhedssystem › 27.17.20 sikkerhedssele/selelås/selestrammer — Serie 207 (modeller 3**, 4**)

AR91.45-P-1000EC

Remove/install seatbelt extender.

17.12.09

MODEL 207.3 /4

Remove/install seatbelt extender.

P91.45-2022-06

1 Screw

2 Rod

3 Line fastening

4 Seat belt extender

5 Electrical connector

6 Nut

7 Bracket

Modification notes

30.4.09

"Remove belt extender rod" added

Step 1

Remove/install

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

1

Remove rod (2) from belt extender (4)

The rod (2) must be removed and inserted again against the resistance from the motor and gearing.

Installation: Do not twist seat belt.

2

Remove upper section of side paneling

AR68.30-P-4780EC

3

Switch off ignition and remove transmitter key or KEYLESS-GO start/stop button from electronic ignition lock control unit

KEYLESS-GO start/stop button only with code (889) Keyless-Go

4

Disconnect electrical connector (5)

5

Unscrew nut (6)

6

Unscrew bolt (1)

7

Extend belt extender (4) out of bracket (7) toward rear

8

Unclip line fastenings (3) at belt extender (4)

9

Install in the reverse order

Henviste dokumenter