P91.40-2432-09
1 Nuts
2 Screw
5 Retaining plate
3 Screw
4 Automatic belt retractor
Modification notes
| Remove/install | ||
Danger! | Risk of injury when performing check and repair work in area of roll bar | Before working in the area of the roll bar, pull out the rear head restraints by hand. Keep body parts out of the area where the roll bar extends. | |
Danger! | Risk of injury caused by release of spring in the automatic belt retractor is released. | Never disassemble automatic belt retractors. | |
1 | Switch off ignition, detach transmitter key from electronic ignition switch control unit | On vehicles with code (889) Keyless go: Press keyless go start/stop button repeatedly until ignition is switched off. Remove the transmitter key from the vehicle and store at a location that is beyond the transmitter range (min. 2 m). | |
2 | Remove rear seat and rear seat backrest | ||
3 | Unscrew bolt (2) | | |
4 | Unscrew nuts (1) | ||
5 | Remove automatic belt retractor (4) with retainer (5) | ||
6 | Unscrew bolt (3) | | |
7 | Remove automatic belt retractor (4) from retainer (5) | ||
8 | Install in the reverse order | ||
9 | Perform function check |
Seat belts/emergency tensioning retractors
Number | Designation | Model | Model | |
BA91.40-P-1005-01A | Screw in rear upper belt guide fitting | Nm | 30 | 30 |
BA91.40-P-1006-01A | Bolt to rear inertia reel | Nm | 30 | 30 |
Airbag
Henviste dokumenter
- ar9112p1700qa
- as9100z000201a Fare for kvæstelser, hvis seleoprulningsautomatens fjeder løsnes
- as9100z000301qa Fare for personskade i området af væltebøjlen ved kontrol- og reparationsarbejde