ar9140p0681gh

Removing and installing rear seat belts

Type ar · emne 91.40 · version 0103 · 2004-10-21

Gælder for: MODELS 163.136 /154 /172 up to 31.8.99

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 91 Sæder, køjer, selestrammere › 91.40 Sikkerhedsseler, selestrammere — Serie 163 (modeller 136, 154, 172)

EinPAS 27 Passive sikkerhedssystemer › 27.17 Sikkerhedssystem › 27.17.20 sikkerhedssele/selelås/selestrammer — Serie 163 (modeller 136, 154, 172)

AR91.40-P-0681GH

Removing and installing rear seat belts

13.3.97

MODELS 163.136 /154 /172 up to 31.8.99

Removing and installing rear seat belts

P91.40-0360-06

1 Bolt

2 Seat belt guide bracket

3 Bolt

4 Automatic belt retractor

5 Belt height adjuster

Removing, installing

Danger!

Risk of injury through expansion of automatic belt retractor spring

Never dismantle automatic belt retractor.

AS91.00-Z-0002-01A

1

Remove paneling on C-pillar

AR68.30-P-4490GH

2

Remove bolt (1) on seat belt guide bracket (2)

If necessary remove belt height adjuster (5) .

*BA91.40-P-1002-01D

3

Remove bolt (3) on automatic belt retractor (4)

*BA91.40-P-1003-01D

4

Remove automatic belt retractor (4)

During installation: Note catch of automatic belt retractor.

5

Check seat belts for damage

AP91.40-P-9150GH

6

Install in the reverse order

Seatbelts/emergency tensioning retractors

Number

Designation

Model 163 up to 08/99

Model 163 as of 09/99

BA91.40-P-1002-01D

Screw in rear upper belt guide fitting

Nm

30

30

BA91.40-P-1003-01D

Screw, on rear automatic belt retractor

Nm

30

30

Henviste dokumenter