Remove/install seats in rear passenger compartment

AR91.12-P-4026MFX

Remove/install seats in rear passenger compartment

17.12.2019

Model

247

with code 567 (Vario rear seat)

Modification notes

09.12.2019

Remove mounting console.

Operation step 4.

09.12.2019

Detach covers over screws (7) from velcro fasteners and place covers to one side.

Operation step 9.2.

Shown on model 247.6

1

Right seat system

2

Left seat system

3

Bolts

4

Cover

5

Cover

6

Cover

Shown on model 247.6

7

Bolts

8

Cover

9

Cover

10

Cover

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

 

Remove/install

1

Detach ground line of on-board electrical system battery.

Model 247
with code 293 (Sidebag in rear left and right)
with code 567 (Vario rear seat)

AR54.10-P-0003MFA

2.1

Remove rear shelf.

Model 247.0/7
with code 567 (Vario rear seat)

2.2

Remove luggage compartment cover.

Model 247.6
with code 567 (Vario rear seat)

3

Remove partitioning net in load compartment.

Model 247
with code 567 (Vario rear seat)
with code U40 (Safety net for luggage cover)

4

Remove mounting support for load compartment floor in front load compartment.

Model 247.6
with code 567 (Vario rear seat)

5

Move left seat system (2) or right seat system (1) all the way to the rear.

6

Unclip covers (4, 5, 6) of respective seat system.

 Dismantling tool

*000589956300

7

Remove screws (3) of respective seat system.

 Bolt, guide rail for rear seat to body

*BA91.12-P-1009-03N

8

Fold over backrest of left seat system (2) or right seat system (1) and move both seat systems to foremost position.

9.1

Unclip covers (8, 9, 10) of respective seat system.

Model 247.6
with code 567 (Vario rear seat)

 Dismantling tool

*000589956300

9.2

Detach covers over screws (7) from velcro fasteners and place covers to one side.

Model 247.0/7
with code 567 (Vario rear seat)

10

Remove screws (7) of respective seat system.

 Bolt, guide rail for rear seat to body

*BA91.12-P-1009-03N

11

Tilt corresponding seat system backwards until electrical connectors are accessible.

12

Release and disconnect electrical connectors from respective seat system.

 The number of electrical connectors varies according to vehicle equipment.

13

Remove electrical wiring harness from left seat system (2) or right seat system (1).

 Dismantling tool

*000589956300

14

Remove left seat system (2) or right seat system (1).

Aid of helper required.


When removing the left seat system (2) or the right seat system (1), do not touch any trim parts in the vehicle.
Otherwise, the trim parts will be damaged.

15

Install in the reverse order.

 Rear seats

Number

Designation

Model 247

BA91.12-P-1009-03N

Bolt, guide rail for rear seat to body

M10

Nm

50