AR91.10-W-3445B | Remove/install bellows | 30.6.09 |
MODEL 930, 932, 933, 934 with CODE (SG5) "Isringhausen" standard driver suspension seat
MODEL 944.###, 950.###, 952.###, 953.###, 954.### ## as of 559667
with CODE (SG2) "Isringhausen" standard front passenger suspension seat
with CODE (SG5) "Isringhausen" standard driver suspension seat
MODEL 970.###, 972.###, 974.###, 975.###, 976.### ## as of 559667
with CODE (SG2) "Isringhausen" standard front passenger suspension seat
with CODE (SG5) "Isringhausen" standard driver suspension seat
MODEL NAB374.602 /655 /682 /685 with CODE (SG2) "Isringhausen" standard front passenger suspension seat
MODEL NAB374.502 /523 /551 /554 /557 /584 /602 /651 /655 /682 /685 with CODE (SG5) "Isringhausen" standard driver suspension seat
MODEL 949
with CODE (SG2) "Isringhausen" standard front passenger suspension seat
with CODE (SG5) "Isringhausen" standard driver suspension seat
1 Bellows
2 Seat frame
3 Base frame
W91.10-1083-03
| Remove/install | ||
1 | Loosen plastic rivets at seat frame (2) | Installation: Replace damaged plastic rivets. | |
2 | Detach retaining clamps from seat frame | The 4 retaining clips are located on the rear of the seat. | |
3 | Detach plastic rivets from supporting frame (3) | Installation: Replace damaged plastic rivets. | |
4 | Set seat in center height position | ||
5 | Rotate boot (1) 90° | ||
6 | Remove boot upwards over seat surface and backrest | ||
7 | Install in the reverse order |