Remove/install vertical shock absorber for seat springing · ar9110w3380c · Mercedes-Benz WIS

AR91.10-W-3380C

Remove/install vertical shock absorber for seat springing

9.7.98

MODELS 950.###, 952.###, 953.###, 954.### ## up to 516699
with CODE (SH1) "Grammer" comfort driver suspension seat
with CODE (SH2) "Grammer"comfort passenger suspension seat

MODELS 970.###, 972.###, 974.###, 975.###, 976.### ## up to 516699
with CODE (SH1) "Grammer" comfort driver suspension seat
with CODE (SH2) "Grammer" comfort passenger suspension seat

Remove/install vertical shock absorber for seat springing

W91.10-1010-06

1 Gaiter plug

2 Boot

3 Level control

4 Belt

5 Bowden cable (seat height adjustment)

6 Bowden cable (rapid seat lowering)

7 Screw

8 Nut

9 Bowden cable (vertical shock absorber)

10 Circlip, upper

11 Circlip, lower

12 Vertical shock absorber

 	Remove/install
1	Remove seat cushion		AR91.10-W-3310D
2	Remove gaiter plug (1) and lay CV boot (2) downward	 Move seat into lowest position.
3	Unscrew screws (7)	 Slowly roll up belt (4).
4	Unscrew nuts (8) from below and lift out level control (3)	 Tip seat to the side
		 Models 950, 952, 953, 954	*BA91.10-N-1003-02A
		 Models 970, 972, 974, 975, 976	*BA91.10-N-1002-02B
5	Detach Bowden cables (5 and 6) from the level control (3)
6	Remove upper circlip (10) and detach Bowden cable (9) at the vertical shock absorber (12)
7	Remove lower circlip (11) and remove vertical shock absorber (12)	 Installation: lettering/imprint must face upward.
8	Install in the reverse order

 Seats

Number	Designation		MODELS 950.5/6, 952.5/6, 953.6, 954.5 with CODE SH1, SH2 up to VIN 516 699	MODELS 950.0/1/2/3, 952.0/1/2/3, 953.1/3, 954.0/1/2 with CODE SH1, SH2 up to VIN 516 699


BA91.10-N-1003-02A	Nut for level control to rocker	Nm	25	25

 Seats

Number	Designation		MODELS 970, 972, 974, 975, 976 with CODE SH1, SH2 up to VIN 516 699


BA91.10-N-1002-02B	Nut for level control to rocker	Nm	25

Henviste dokumenter

ar9110w3310d