Remove/install backrest cover panel and seat belt · ar9110w3320b · Mercedes-Benz WIS

AR91.10-W-3320B

Remove/install backrest cover panel and seat belt

9.3.06

MODEL 970, 972, 974, 975, 976 with BODY 972.899
with CODE (SG2) "Isringhausen" standard front passenger suspension seat
with CODE (SG3) "Isringhausen" luxury driver suspension seat
with CODE (SG4) "Isringhausen" luxury front passenger suspension seat
with CODE (SG5) "Isringhausen" standard driver suspension seat

MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 with BODY 940.899
with CODE (SG2) "Isringhausen" standard front passenger suspension seat
with CODE (SG3) "Isringhausen" luxury driver suspension seat
with CODE (SG4) "Isringhausen" luxury front passenger suspension seat
with CODE (SG5) "Isringhausen" standard driver suspension seat

MODEL 957 with BODY 957.810 with CODE (SH1) "Grammer" comfort driver suspension seat

Remove/install backrest cover panel and seat belt

W91.10-0042-06

1 Backrest trim cover

2 Cross-recessed screw

3 Seat belt reel

4 Hexagon bolt

5 Cross-recessed screw

6 Seat belt reel cover

7 Cap

8 Hexagon bolt

9 Plastic ring

10 Retaining clip

11 Washer

12 Disk spring

13 Guide sleeves

14 Head restraint

15 Guide bracket

16 Bracket

17 Hexagon nut

 	Remove/install
1	Fold backrest completely toward front.
2	Remove seat belt reel cover (6)
3	Pull out head restraint (14)
4	Pull pilot bushings (13) out of backrest cover	 Guide a suitable wire for releasing the catch tab from above into the opening of the interlocking piece.
5	Remove retaining bracket (10) at seat	 Model 970, 972, 974, 975, 976	*BA91.40-N-1003-01E
		 Model 950, 952, 953, 954	*BA91.40-N-1009-01D
		 Model series 957	*BA91.40-N-1006-01F
		 Installation: Attach vinyl rings (9), washer (11) and disk spring (12). Ensure correct belt path.
6	Remove backrest cover (1)	 Remove seat belt from cutout of backrest cover above seat belt reel (3). Slide backrest cover up and pull free seat belt end through.  Installation: When properly installed, the seat belt runs from the rear through the suspended guide bracket (15) toward the front and at the bottom through opening on front side of backrest cover.
7	Remove guide bracket (15)	 Model 970, 972, 974, 975, 976	*BA91.40-N-1003-01E
		 Model 950, 952, 953, 954	*BA91.40-N-1009-01D
		 Model series 957	*BA91.40-N-1006-01F
		 Installation: The seat belt must not be twisted between the seat belt reel (3) and the suspended guide bracket.
8	Remove belt reel (3)	 Model 970, 972, 974, 975, 976	*BA91.40-N-1006-01E
		 Model 950, 952, 953, 954	*BA91.40-N-1012-01D
		 Model series 957	*BA91.40-N-1007-01F
		 Installation: Hook T-bracket of seat belt reel in cutout on seat substructure.
9	Install in the reverse order

 Seat belts/emergency tensioning retractors

Number	Designation		Model 374.5, 950.5/6, 952.5/6, 953.6, 954.5


BA91.40-N-1009-01D	Seat belt attachment at seat	Nm	35
BA91.40-N-1012-01D	Bolt, belt reel at seat base	Nm	35

 Seat belts/emergency tensioning retractors

Number	Designation		Model 970, 972, 974, 975, 976


BA91.40-N-1003-01E	Seat belt attachment at seat	Nm	35
BA91.40-N-1006-01E	Bolt, belt reel at seat base	Nm	35

 Seat belts/emergency tensioning retractors

Number	Designation		Design 957.810 in model 957


BA91.40-N-1006-01F	Bolt, seat belt bracket to seat	Nm	90
BA91.40-N-1007-01F	Bolt, belt reel at seat base	Nm	90