AR91.10-W-1040A | Remove/install the lower side paneling on the front seat | 27.8.09 |
MODEL 375.1
with CODE (SC2) "Grammer" standard front passenger suspension seat
with CODE (SC5) "Grammer" standard driver suspension seat
MODEL 375.3
with CODE (SC2) "Grammer" standard front passenger suspension seat
with CODE (SC5) "Grammer" standard driver suspension seat
MODEL 950.###, 952.###, 953.###, 954.### ## as of 516700
with CODE (SH1) "Grammer" comfort driver suspension seat
with CODE (SH2) "Grammer" comfort front passenger suspension seat
with CODE (SH6) "Grammer" comfort driver suspension seat with horizontal springing
MODEL 930, 932, 933, 934
with CODE (SH1) "Grammer" comfort driver suspension seat
with CODE (SH2) "Grammer" comfort front passenger suspension seat
with CODE (SH6) "Grammer" comfort driver suspension seat with horizontal springing
with CODE (SS1) "Grammer" leather comfort driver seat
with CODE (SS2) "Grammer" leather comfort front passenger seat
MODEL 970.###, 972.###, 974.###, 975.###, 976.### ## as of 516700
with CODE (SH1) "Grammer" comfort driver suspension seat
with CODE (SH2) "Grammer" comfort front passenger suspension seat
MODEL 375.4
with CODE (SC2) "Grammer" standard front passenger suspension seat
with CODE (SC5) "Grammer" standard driver suspension seat
MODEL 940, 942, 943, 944
with CODE (SH1) "Grammer" comfort driver suspension seat
with CODE (SH2) "Grammer" comfort front passenger suspension seat
with CODE (SH6) "Grammer" comfort driver suspension seat with horizontal springing
W91.10-1036-06
1 Left paneling
2 Lumbar support valve
3 Plastic grommet
4 Compressed-air line
5 Compressed-air line
6 Compressed-air line
7 Front trim
8 Plug
9 Screw
10 Longitudinal horizontal suspension lever
11 Right trim piece
12 Carrier
13 Seat belt buckle
14 Screw
15 Screw
16 Seat frame
17 Heater cable plug
18 Upper hook
19 Bracket
Modification notes
| Remove/install | ||
1.1 | Remove seat and console | Model 930, 932, 933, 934, 950.0/1/2/3, 952.0/1/2/3, 953.1/3, 954.0/1/2 | |
1.2 | Remove front seat | Model 375, 940, 942, 943, 944, 950.5/6, 952.5/6, 953.6, 954.5, 970, 972, 974, 975, 976 | |
2 | Remove seat cushion | ||
3 | Remove left panel (1) | ||
4 | Disconnect heater cable plug (17) from switch | ||
5 | Detach compressed air lines (4, 5, 6) | Only when replacing left panel (1). | |
Installation: Use new plastic grommets (3). Note marking of compressed air lines (4, 5, 6). | |||
6 | Remove bolt (14) | ||
7 | Unhook right paneling (11) from seat frame (16) and from front paneling (7) | Carefully unhook upper hooks (18) downwards from carriers (12). Then press right paneling (11) upward and at the same time remove brackets (19) outward from carriers (12). | |
8 | Carefully remove the right paneling (11) above seat belt buckle (13) | ||
9 | Pry out stop plug (8) at longitudinal horizontal suspension lever (10) | Use scriber or similar pointed object. | |
10 | Remove screw/bolt (9) and remove longitudinal horizontal suspension lever (10) | ||
11 | Remove front paneling (7) | ||
12 | Install in the reverse order |