Remove/install outer trim on seat frame

AR91.10-S-1201P

Remove/install outer trim on seat frame

31.10.2018

Model

470, 471

except code SF1 (Electrically adjustable driver's seat)

except code SF2 (Electrically adjustable co-driver's seat)

Modification notes

20.09.2018

Loosen electrical connector for seat heating switch upwards and disconnect, added.

Step 5

04.10.2018

Unclip electrical wiring harness for seat heating switch from outer trim, added.

Operation step 6

Outer trim (1), shown on driver's seat in model 470.### 2#

1

Outer cover

3

Adjustment lever for seat backrest adjustment

5

Adjustment lever for seat cushion adjustment

2

Adjustment lever trim

4

Cover

6

Bolts

Outer trim (1), shown on driver's seat in model 470.### 2#

1

Outer cover

7

Screw

8

Retaining clips

9

Catch hook

10

Outer hinge cover

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Move respective front seat fully forward and upward.

2

Swivel adjustment lever trim (2) upwards (arrow A), pull forwards (arrow B) and remove from adjustment lever for seat backrest adjustment (3).

3

Unlatch cover (4) on adjustment lever for seat cushion adjustment (5) through bore (arrow C) using a suitable tool and remove.

4

Remove screw/bolts (6).

5

Release electrical connector for seat heating switch upwards and disconnect.

Model 470, 471
with code H15 (Seat heater for front passenger)
except code SF1 (Electrically adjustable driver's seat)
except code SF2 (Electrically adjustable co-driver's seat)
Model 470, 471
with code H16 (Seat heater for driver)
except code SF1 (Electrically adjustable driver's seat)
except code SF2 (Electrically adjustable co-driver's seat)

6

Unclip electrical wiring harness for seat heating switch from outer trim (1).

Model 470, 471
with code H15 (Seat heater for front passenger)
except code SF1 (Electrically adjustable driver's seat)
except code SF2 (Electrically adjustable co-driver's seat)
Model 470, 471
with code H16 (Seat heater for driver)
except code SF1 (Electrically adjustable driver's seat)
except code SF2 (Electrically adjustable co-driver's seat)

7

Remove adjustment lever for seat cushion adjustment (5).

8

Unscrew bolt (7).

9

Unfasten outer trim (1) at catch hooks (9) of outer hinge cover (10).


Carefully release catch hooks (9).
Otherwise, the catch hooks (9) can break.

 Installation: Ensure that outer trim (1) is seated correctly on outer hinge cover (10).

 Installation: Check catch hooks (9) for damage.

 Long wedge

*115589035900

If there is a problem,



Replace outer trim (1) or outer hinge cover (10).

10

Release retaining clips (8) from front seat frame and remove outer trim (1).

 Installation: Check outer trim (1) is correctly seated on front seat frame.

 Installation: Check retaining clips (8) for damage.

If there is a problem,



replace respective retaining clips (8).

11

Install in the reverse order



Check

12

Perform function test of seat adjustment at front seat.