AR91.10-P-1000GH | Remove/install front seat | 3.3.97 |
MODEL 163.113 /128 /136 /154 /157 /172 /174 /175 with CODE (221b) Electrically adjustable driver and passenger seat
P91.10-0547-06
1 Torx socket screws
2 Cover cap
3 Front seat
4 Torx socket bolt
5 Belt end fitting
6 Connector
X55/3 Left front seat contacting strip
X55/4 Right front seat connector block
| Remove/install | ||
1 | Remove headrest | See owner's manual | |
2 | Remove cover cap (2) from seat rail paneling | Set the seat height adjustment such that the screw on the belt end fitting is visible. | |
3 | Unscrew internal Torx drive bolt (4) from the belt end fitting (5) | | |
Torx bit set | |||
4 | Remove belt end fitting (5) | ||
5 | Unscrew internal Torx drive bolts (1) from the front seat console | Installation: Replace bolts. | |
| |||
Torx bit set | |||
6 | Move the front seat (3) forward | ||
7 | Unscrew internal Torx drive bolts (1) from the back seat console | Installation: Replace bolts. | |
| |||
Torx bit set | |||
8 | Detach connector (6) from the front left seat connector block (X55/3) and the front right seat connector block (X55/4) | ||
9 | Remove front seat (3) | ||
10 | Install in the reverse order |
Front seats
Number | Designation | Model Series 163 | |
BA91.10-P-1001-01B | Bolt of seating mounting bracket to vehicle floor | Nm | 40 |
Safety belts/emergency tensioning retractors
Number | Designation | Model 163 up to 08/99 | Model 163 as of 09/99 | |
BA91.40-P-1001-01D | Belt end fitting screw | Nm | 35 | 35 |
Torx bit set
000 589 01 10 00