Remove/install windshield wiper linkage cover

AR88.80-W-5100A

9.9.97

MODEL 375.4 with BODY 375.840

MODEL 944 with BODY 944.899

MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 with BODY 940.899

MODEL 970, 972, 974, 975, 976 with BODY 972.899

W88.80-0004-09

Shown on model 970

5 Screw

6 Nut

7 Hose line

1 Cap

2 Screw

3 Handle

4 Windshield wiper linkage cover

 	Removal/installation
1	Remove wiper arms		AR82.30-W-6100A
2	Remove front flap		AR88.60-W-2901B
3	Remove wind guides on right and left of front end pillar
4	Remove right and left covers from front end pillar		AR88.30-W-0001A
5	Remove caps (1) from handles (3)
6	Remove handle (3)	 Body 375.840, 944.899	*BA82.30-N-1008-01B
		 Body 940.899, 972.899	*BA82.30-N-1004-01C
7	Disconnect hose line (7) on connection element from windshield wiper linkage cover (4)
8	Unscrew nuts (6) and remove windshield wiper linkage cover (4)	 Check rear of windshield wiper linkage cover for proper state, replace if necessary.
9	Install in the reverse order

 Windshield wiper

Number	Designation		Body 375.840 in model 375.4	Body 940.890/899 in model 950.5/6, 952.5/6, 953.6, 954.5	Body 944.899 in model 944


BA82.30-N-1008-01B	Screw for handle and wiper linkage cover on firewall	Nm	18	18	18

 Windshield wiper

Number	Designation		Body 972.899 in model 970, 972, 974, 975, 976


BA82.30-N-1004-01C	Screw for handle and wiper linkage cover on firewall	Nm	18