P88.80-2024-09
Shown on model 203.0
1 Longitudinal member paneling
2 Expansion rivets
7 Rear door sill cover
10 Expansion rivets
3 Clamps
5 Clips
6 Front door sill cover
P88.30-2285-09
1 Longitudinal member paneling
11 Stop for sealing
13 Sealing
12 Plastic studs
| Remove/Install | ||
Danger! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between the columns of the hydraulic hoist and position the four support plates below the hoist support points specified by the vehicle manufacturer. | |
Danger! | Risk of explosion caused by paint vapors igniting. Risk of poisoning caused by inhaling paint vapors. | No smoking! No open flames! Use respiratory protection, protective clothing, gloves, safety goggles and skin cream. Ensure that the area is well ventilated. | |
Danger! | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels. | |
1 | Install support plate on hoisting platform mounting points | Adapter kit | |
2 | Pry off front entrance cover (6) and rear entrance cover (7) with mounting wedge | Long wedge | |
3 | Remove expansion rivet (2) | ||
4 | Unscrew screws for underbody paneling along longitudinal member paneling (1) | ||
5 | Remove expansion rivet (10) | Remove front expansion rivet below inner wheelhouse panel | |
6 | Press longitudinal member paneling (1) outward at front end (arrow) with mounting wedge | Long wedge | |
7 | Unclip longitudinal member paneling (1) and remove | Installation: Use modified front seal and rear seal of longitudinal member paneling (1). | |
8.1 | Shorten sealing (13) | Model 203.7 up to production date 18.07.04 Shorten sealing (13) 15 mm. Separate sealing in area A | |
Body saw (electric/pneumatic) | |||
9.1 | Separate stop for sealing (13) | Model 203.7 up to production date 18.07.04 Separate stop for sealing (13) along edge in area C | |
Body saw (electric/pneumatic) | |||
10.1 | Separate plastic pins (12) | Model 203.7 up to production date 18.07.04 Separate plastic pins (12) along edge in area B | |
Body saw (electric/pneumatic) | |||
11.1 | Paint separation points to match color of car | Model 203.7 up to production date 18.07.04 | |
12 | Install in the reverse order |
203 589 02 31 00
Adapter kit
Long wedge
115 589 03 59 00
Workshop equipment
WE58.40-Z-1004-03A | Body saw (electric/pneumatic) |
Henviste dokumenter
- as0000z001001a Livsfare, hvis køretøjet glider ned fra eller tipper på liften.
- as0000z001701a Fare for personskade på grund af snitsår eller hudafskrabninger grundet skarpkantede køretøjsdele
- as9800z000201a Fare for eksplosion på grund af antændelse af lakdampe. Fare for forgiftning på grund af indånding af lakdampe