P88.20-3036-09
Vehicle up to 30.8.10
1 longitudinal member panel
2 Expansion clips
5 Longitudinal member
3 Bracket
4 Catch hook
P88.00-2505-09
Vehicle as of 31.8.10
1 longitudinal member panel
2 Expansion clips
5 Longitudinal member
6 Retaining rail
3 Bracket
4 Catch hook
P88.80-2210-11
Vehicle as of 31.8.10
1 longitudinal member panel
6 Retaining rail
| Remove | ||
1 | Remove expansion clips (2) from longitudinal member panel (1). | ||
2 | Unclip catch hook (4) on longitudinal member panel (1) from longitudinal member (5). | ||
3 | Slightly pull longitudinal member panel (1) toward outside in front area and slide toward rear until bracket (arrow A) separates from guide (arrow C). | ||
4 | Slightly pull longitudinal member panel (1) in front area toward outside, slide toward rear and remove. | ||
5 | Unscrew brackets (3) still located on the threaded studs (arrows B) on the longitudinal member (5). | ||
6 | Unclip retaining rail (6) from catch hook (arrows D) from longitudinal member panel (1) and remove | Vehicles as of 31.8.10 and only when replacing longitudinal member panel (1) | |
| Install | ||
7 | Clip retaining rail (6) into catch hooks (arrows D) on longitudinal member panel (1) | Vehicles as of 31.8.10 and only when replacing longitudinal member panel (1) | |
8.1 | Insert brackets (3) into guides on longitudinal member panel (1). | Vehicles up to 30.8.10 | |
8.2 | Insert brackets (3) into retaining rail (6). | Vehicles as of 31.8.10 | |
9 | Insert bracket (arrow A) into guide (arrow C) and clip brackets (3) on longitudinal member paneling (1) into threaded studs (arrows B) on longitudinal member (5). | ||
10 | Clip catch hook (4) on longitudinal member panel (1) into longitudinal member (5). | ||
11 | Install expansion clips (2) on longitudinal member panel (1). |