ar8880p4000lf

Unfasten/fasten drip rail in area of windshield

Type ar · emne 88.80 · version 0102 · 2016-05-09

Gælder for: Model 217, 222

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 88 Monteringsdele, udvendige klapper › 88.80 Afdækningslister — Serie 217 · Serie 222

EinPAS 35 Karrosseri/ramme/monteringsdele › 35.38 kofanger/spoiler/beklædning udvendig/opbevaringsboks/frontbeskyttelse › 35.38.44 beklædning/liste/frontbeskyttelse — Serie 217 · Serie 222

AR88.80-P-4000LF

Unfasten/fasten drip rail in area of windshield

21.04.2016

Model

217, 222

Unfasten/fasten drip rail in area of windshield

P88.80-2235-08

Shown on right drip rail (1) on MODEL 222

1

Drip molding

2

Retaining clamp

3

Mounting clip

Unfasten/fasten drip rail in area of windshield

1	Drip molding
2	Retaining clamp

P88.80-2238-11

 	Remove/install
1	Open engine hood
2	Unclip drip rail (1) from retaining clips (2) on A-pillar starting at front with assembly wedge	 Unclip drip rail (1) from retaining clips (2) by pulling in straight line (direction of arrow). Otherwise the mounts on the retaining clips (2) on the A-pillar can be damaged.
		 Carefully unclip drip rail (1) from retaining clips (2). Otherwise the drip rail (1) can be deformed otherwise.
		 Mounting wedge	*110589035900
3	Unclip drip rail (1) on retaining clips (3) from roof paneling with assembly wedge and remove	 Carefully unclip drip rail (1) from retaining clips (3). Otherwise the drip rail (1) can be deformed otherwise.
		 Installation: Check retaining clips (3) for damage.
		 Mounting wedge	*110589035900
4	Install in the reverse order

Unfasten/fasten drip rail in area of windshield

110 589 03 59 00

Mounting wedge