P88.70-2033-06
Shown on model 220 up to VIN: 316716
1 Paneling
2 Bottom catch spring
3 Turn signals
4 Outside mirrors
5 Turn signal connector on outside rearview mirror
6 Turn signal connector in outside rearview mirror covering
P88.70-2243-06
Shown on model 220 as of VIN: 316717
1 Paneling
4 Outside mirrors
7 Upper catch spring
| Remove | ||
1.1 | Remove mirror glass | Model 220 as of VIN: 316717 | |
2.1 | Release bottom catch spring (2) | Model 220 up to VIN: 316716 Do not damage paintwork. | |
2.2 | Release top catch spring (7) | Model 220 as of VIN: 316717 Avoid damaging paint. | |
3 | Remove paneling (1) | ||
| Install | ||
4.1 | Move bottom catch spring (2) to initial position | Model 220 up to VIN: 316716 | |
5.1 | Check position of connector for turn signal on outside rearview mirror (5) and turn signal connectors in outside rearview mirror covering (6) | Model 220 up to VIN: 316716 If the connectors are not in the correct position, damage can occur when the covering (1) is installed. | |
6 | Push on paneling (1) | Ensure that the covering (1) is arrested in the end position by the bottom catch spring (2) or top catch spring (7). | |
Model 220 up to VIN: 316716 Ensure that the turn signal connector is connected properly to the outside rearview mirror (5). | |||
7 | Check for proper function |