1 | Handle strip |
2 | Trunk lid |
P88.50-3115-06
1 | Handle strip |
3 | Mounting clip |
4 | Adhesive piece |
P88.50-3114-06
Danger ! | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | |
| Notes on sensor system for trunk lid opening/closing | Model 205.0/1 | |
| Remove | ||
1 | Remove license plate with license plate number | ||
2 | Mask hatched area (arrow C) on trunk lid (2) | ||
3 | Pull handle strip (1) out of trim piece with extraction hook (arrow A) | Then the adhesive piece (4) is loosened simultaneously in this area. | |
Extraction hook | |||
4 | Unclip handle strip (1) from trim piece (arrows B) | Mounting wedge | |
5 | Unclip retaining clips (3) and remove handle strip (1) | Replace damaged retaining clip (3). | |
Mounting wedge | |||
| Install | ||
6 | Remove adhesive from trunk lid (2) and clean bonding surfaces | Bonding surface must be free of grease and dust. | |
Cleaner | |||
7 | Remove adhesive residues from handle strip (1) | When reusing handle strip (1). | |
Bonding surface must be free of grease and dust. | |||
Cleaner | |||
8 | Install new adhesive piece (4) on handle strip (1) | When reusing handle strip (1). | |
Adhesive tape | |||
9 | Position handle strip (1) on trunk lid (2) and clip in | ||
10 | Press on handle strip (1) in area of adhesive piece (4) | ||
11 | Remove adhesive tape from hatched area (area C) | ||
12 | Remove license plate number with license plate bracket |
110 589 03 59 00
Mounting wedge
140 589 02 33 00
Extraction hook
Henviste dokumenter
- ah8061p000101a Oplysninger om HANDS-FREE ACCESS
- as0000z001101a Fare for personskade pga. fastklemning eller knusning af fingre ved af-, påmontering og indstillingsarbejde på motorhjelm og bagklap, døre, dæksler og soltag.