ar8840w0001a

Removing and installing model designation on front flap

Type ar · emne 88.40 · version 0100 · 2004-05-06

Gælder for: MODEL 375.3 with BODY 375.810 MODEL 375.4 with BODY 375.840 MODEL 944 with BODY 944.899 MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 with SUPERSTRUCTURE 940.899

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 88 Monteringsdele, udvendige klapper › 88.40 Motorhjelm, frontklap — Serie 375 (modeller 3**, 4**, 810, 840) · Serie 940 (modeller 899) · Serie 944 · Serie 950 (modeller 5**, 6**) · Serie 952 (modeller 5**, 6**) · Serie 953 (modeller 6**) · Serie 954 (modeller 5**)

EinPAS 45 Data/information › 45.35 Markering › 45.35.22 Logo/biltypeskilt/typeskilt/nummerplade — Serie 375 (modeller 3**, 4**, 810, 840) · Serie 940 (modeller 899) · Serie 944 · Serie 950 (modeller 5**, 6**) · Serie 952 (modeller 5**, 6**) · Serie 953 (modeller 6**) · Serie 954 (modeller 5**)

AR88.40-W-0001A

Removing and installing model designation on front flap

14.2.02

MODEL 375.3 with BODY 375.810

MODEL 375.4 with BODY 375.840

MODEL 944 with BODY 944.899

MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 with SUPERSTRUCTURE 940.899

Removing and installing model designation on front flap

W88.40-1001-12

Shown on model 944

A 30 mm

B 25 mm

Removal

1

Heat model designation with hot air gun and remove

2

Clean front flap

The front flap should be free of dust and grease in the area of the model designation.

Install

3

Align model designation according to dimension (A) and (B) and glue on.

The model designation has a self-adhesive foil and can no longer be corrected after it has been glued on.