ar8840s2546p

Remove/install insulation on hood

Type ar · emne 88.40 · version 0100 · 2017-05-29

Gælder for: Model 470, 471

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 88 Monteringsdele, udvendige klapper › 88.40 Motorhjelm, frontklap — Serie 470 · Serie 471

EinPAS 35 Karrosseri/ramme/monteringsdele › 35.25 dæmpningselement/afdækning forneden/tætning/undervognsbeklædning › 35.25.40 Dæmpning/afskærmning/isoleringsmåtte — Serie 470 · Serie 471

AR88.40-S-2546P

Remove/install insulation on hood

10.05.2017

Model

470, 471

Remove/install insulation on hood

1

Insulation

2

Retaining clips

3

Bracket

S88.10-4535-05

Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Remove/install

1

Unclip retaining clips (2) from insulation (1)

2

Remove insulation (1)

Installation: Ensure that insulation (1) is seated correctly in brackets (3).

3

Install in the reverse order

Henviste dokumenter