P88.40-2445-09
1 Radiator paneling upper section
2 Radiator paneling lower section
5 Catch lugs
3 Plastic nuts
4 Bolts
| Remove | ||
Danger! | Risk of injury to fingers being jammed or pinched when Remove/install or aligning hoods, doors, trunk lid/tailgate or sliding roof. | When moving components, ensure that no body parts or limbs are within the operating range of moving parts. | |
1 | Open engine hood | ||
2 | Remove bolts (4). | ||
3 | Release radiator paneling bottom section (2) | Push catch lugs (5) upward using a suitable tool. | |
4 | Press radiator paneling bottom section (2) toward rear in the lower area and remove | ||
5 | Loosen plastic nuts (3) on upper section of radiator paneling (1) | It is not necessary to unscrew the plastic nuts (3) completely | |
6 | Remove radiator paneling top section (1) toward front | ||
| Install | ||
7 | Position radiator paneling bottom section (2) and press toward front | Radiator paneling bottom section (2) should arrest audibly | |
8 | Screw in bolts (4) | ||
9 | Insert radiator paneling top section (1) into engine hood | Align radiator paneling top section (1) on hood contour | |
10 | Tighten plastic nuts (3) on radiator paneling top section (1) | ||
11 | Close engine hood |
Henviste dokumenter
- ar8840p1000p
- ar8840p1000p
- as0000z001101a Fare for personskade pga. fastklemning eller knusning af fingre ved af-, påmontering og indstillingsarbejde på motorhjelm og bagklap, døre, dæksler og soltag.