P88.20-2252-09
4 Electrical connector
(with code (889) Keyless Go)
5 Electrical connector
(with code (220) Parktronic system (PTS))
9 Mounting wedge
10 Bolt
6 Nuts
7 Nut
8 Left fender liner
P88.20-2253-09
1 Rear bumper
9 Mounting wedge
11 Bolts
14 Bolt
15 Bolts
12 Nuts
13 Right fender liner
Modification notes
| Remove/install | ||
1 | Remove trim from rear end center assembly | ||
2 | Remove spare tire well paneling | ||
3 | Loosen left and right side paneling in trunk | On vehicles without code (287) Through-loading feature, except CODE (924) Bivalent natural gas drive | |
On vehicles with code (287) Through-loading feature. | |||
4 | Separate electrical connectors (4) | On vehicles with code (889) Keyless Go. | |
5 | Disconnect electrical connectors (5) | On vehicles with code (220) Parktronic system (PTS). | |
6 | Unscrew nuts (6) | ||
7 | Loosen pressure reservoir with lines connected and lay down to side. | On vehicles with code (489) Airmatic (semi-active air suspension). | |
8 | Remove bolts (11) | ||
9 | Remove nut (7) | ||
10 | Loosen left inner fender (8) from fender with assembly wedge (9) | Until screw (10) is accessible. | |
| |||
11 | Unscrew bolt (10) | ||
12 | Unscrew nuts (12) | ||
13 | Loosen right inner fender (13) from fender with assembly wedge (9) | Until screw (14) is accessible. | |
| |||
14 | Unscrew bolt (14) | ||
15 | Remove bolts (15) | ||
16 | Remove rear bumper (1) | ||
17 | Install in the reverse order |
Assembly wedge
110 589 03 59 00