Disassemble/assemble front bumper

AR88.20-P-2050LF

Disassemble/assemble front bumper

20.07.2017

Model

222

up to model year 2018

Shown on vehicle with code U60 (Pedestrian protection)

1

Front bumper

8

Reinforcing bar

13

Air grille

3

Pedestrian protection sensor

9

Cover

5

Impact absorber

12

Air grille

Shown on vehicle with code U60 (Pedestrian protection), with code 235 (Active Parking Assist) and with code 238 (Active Lane Keeping Assist)

1

Front bumper

6

Electrical wiring harness

2

Inner front parking system distance sensor

7

Front bumper radar sensor

Shown on vehicle with code U60 (Pedestrian protection) and code 235 (Active Parking Assist)

1

Front bumper

10

Carrier

11

Expansion rivet

1

Front bumper

13

Air grille

12

Air grille

14

Tow hook cover



Remove

1

Remove front bumper (1)

AR88.20-P-2000LF

 

Disassemble/assemble

2

Remove license plate number and license plate bracket

3

Remove pedestrian protection sensors (3)

Model 222
up to model year 2018
with code U60 (Active Bonnet (Pedestrian protection))

AR91.60-P-0950EWM

4

Remove impact absorber (5)

Topical note

General information on the impact absorber

AH88.20-P-1000-01A

5

Remove front parking system distance sensors (2)

Model 222
up to model year 2018
with code 235 (Active Parking Assist with PARKTRONIC)

AR54.65-P-0001LF

6

Unclip front bumper radar sensors (7)

Model 222
up to model year 2018
with code 233 (DISTRONIC PLUS)
Model 222
up to model year 2018
with code 237 (Active Blind Spot Assist)
Model 222
up to model year 2018
with code 238 (Active lane keeping Assist)
Model 222
up to model year 2018
with code 258 (COLLISION PREVENTION ASSIST)
Model 222
up to model year 2018
with code 266 (DISTRONIC PLUS with Steer Assist and Stop & Go Pilot)
Model 222
up to model year 2018
with code 268 (Brake Assist System Plus)
Model 222
up to model year 2018
with code 269 (Brake Assist PLUS with Cross-Traffic Assist (BAS+Q)
Model 222
up to model year 2018
with code 300 (PRE-SAFE® Brake)

AR30.30-P-1210LF

7

Unclip electrical wiring harness (6) from front bumper (1) and remove

8

Remove reinforcing bars (8)

9

Remove cover (9)

 Depending on the engine version, a cover (9) can be installed on the left or on the right side.

 Mounting wedge

*110589035900

10

Remove expansion rivets (11)

11

Unclip left and right bracket (10)

 Each carrier (10) consists of three parts and is removed as one unit.

 Mounting wedge

*110589035900

12

Remove left air grille (12) and right air grille (12)

 Depending on engine variant, an air grille (12) can be installed on left as well as right side.

 Mounting wedge

*110589035900

13

Remove air grille (13)

 Mounting wedge

*110589035900

14

Remove tow hook cover (14)

15

Assemble in the reverse order



Install

16

Install front bumper (1)

AR88.20-P-2000LF