ar8820p2001lw

Adjust front bumper

Type ar · emne 88.20 · version 0507 · 2018-04-30

Gælder for: Model 205, 213, 238

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 88 Monteringsdele, udvendige klapper › 88.20 Kofangere — Serie 205 · Serie 213 · Serie 238

EinPAS 35 Karrosseri/ramme/monteringsdele › 35.38 kofanger/spoiler/beklædning udvendig/opbevaringsboks/frontbeskyttelse › 35.38.30 Kofanger foran — Serie 205 · Serie 213 · Serie 238

AR88.20-P-2001LW

Adjust front bumper

29.03.2018

Model

205, 213, 238

Adjust front bumper

P88.20-4261-09

Shown on model 205 with code P76 (Standard equipment, Exterieur)

1	Front bumper		4	Bolts
2	Engine hood		5	Catch
3	Screw		6	Screw

 Warning	Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.	No parts of the body or limbs should be within the operating area when the components are moving.	AS00.00-Z-0011-01A
	Check
1	Check adjustment of front bumper (1).	Model 205	AR60.00-P-0700-01LW
		Model 213	AR60.00-P-0700-01LWE
		Model 238	AR60.00-P-0700-01LWO
		Model 205Engine hood to radiator trim/soft nose	*BE60.00-P-1003-01BB
		Model 205Protrusion of radiator trim/soft nose, engine hood	*BE60.00-P-1004-01BB
		Model 205Engine hood to bumper	*BE60.00-P-1005-01BB
		Model 205Bumper to headlamp	*BE60.00-P-1006-01BB
		Model 213Engine hood to radiator trim/soft nose	*BE60.00-P-1003-01GA
		Model 213Protrusion of radiator trim/soft nose, engine hood	*BE60.00-P-1004-01GA
		Model 213Engine hood to bumper	*BE60.00-P-1005-01GA
		Model 213Bumper to headlamp	*BE60.00-P-1006-01GA
		Model 238Engine hood to radiator trim/soft nose	*BE60.00-P-1003-01HA
		Model 238Protrusion of radiator trim/soft nose, engine hood	*BE60.00-P-1004-01HA
		Model 238Engine hood to bumper	*BE60.00-P-1005-01HA
		Model 238Bumper to headlamp	*BE60.00-P-1006-01HA
		 Feeler gauge	*129589032100
	Adjust
2	Open hood (2).
3	Loosen screws (3, 4).
4	Release front bumper (1) from arrests (5) and pull toward front.
5	Switch on ignition.	Model 205 with code 5U3 (AIRPANEL)
		 The flaps in the radiator trim open after approx. 120 s.
6	Release screws (6).	Model 205 (except 205.064/086/087/264/286/287/364/386/387/464/486/487), 213, 238
7	Close hood (2).
8	Adjust front bumper (1) in relation to hood (2) and headlamps.	Model 205Engine hood to radiator trim/soft nose	*BE60.00-P-1003-01BB
		Model 205Protrusion of radiator trim/soft nose, engine hood	*BE60.00-P-1004-01BB
		Model 205Engine hood to bumper	*BE60.00-P-1005-01BB
		Model 205Bumper to headlamp	*BE60.00-P-1006-01BB
		Model 213Engine hood to radiator trim/soft nose	*BE60.00-P-1003-01GA
		Model 213Protrusion of radiator trim/soft nose, engine hood	*BE60.00-P-1004-01GA
		Model 213Engine hood to bumper	*BE60.00-P-1005-01GA
		Model 213Bumper to headlamp	*BE60.00-P-1006-01GA
		Model 238Engine hood to radiator trim/soft nose	*BE60.00-P-1003-01HA
		Model 238Protrusion of radiator trim/soft nose, engine hood	*BE60.00-P-1004-01HA
		Model 238Engine hood to bumper	*BE60.00-P-1005-01HA
		Model 238Bumper to headlamp	*BE60.00-P-1006-01HA
		 Feeler gauge	*129589032100
9	Open hood (2).
10	Tighten screws (3, 4).
11	Tighten screws (6).	Model 205 (except 205.064/086/087/264/286/287/364/386/387/464/486/487), 213, 238
12	Close hood (2).
13	Switch off ignition.	Model 205 with code 5U3 (AIRPANEL)
	Calibrate
14	Calibrate 360° camera with diagnosis system.
		Model 205, 213 with code 501 (360° camera)	AD00.00-P-2000-04B
		Model 238 with code 501 (360° camera)	AD00.00-P-2000-06LWO

Check values for gap dimensions

Number	Designation			Model 205.0/1	Model 205.2
BE60.00-P-1003-01BB	Engine hood to radiator trim/soft nose	Dimension "C"	mm	3,5 (1)	3,5 (1)
		For picture, see		AR60.00-P-0700-01LW	AR60.00-P-0700-01LW

Check values for gap dimensions

Number	Designation			Model 205.3	Model 205.4
BE60.00-P-1003-01BB	Engine hood to radiator trim/soft nose	Dimension "C"	mm	3,5 (1)	3,5 (1)
		For picture, see		AR60.00-P-0700-01LW	AR60.00-P-0700-01LW

Check values for gap dimensions

Number	Designation			Model 213.0/1	Model 213.2
BE60.00-P-1003-01GA	Engine hood to radiator trim/soft nose	Dimension "C"	mm	3,6 (0,8)	3,6 (0,8)
		For picture, see		AR60.00-P-0700-01LWE	AR60.00-P-0700-01LWE

Check values for gap dimensions

Number	Designation			Model 238.3	Model 238.4
BE60.00-P-1003-01HA	Engine hood to radiator trim/soft nose	Dimension "C"	mm	3,5 (0,5)	3,5 (0,5)
		For picture, see		AR60.00-P-0700-01LWO	AR60.00-P-0700-01LWO

Check values for gap dimensions

Number	Designation			Model 205.0/1	Model 205.2
BE60.00-P-1004-01BB	Protrusion of radiator trim/soft nose, engine hood	Dimension "C"	mm	1 (1)	1 (1)
		For picture, see		AR60.00-P-0700-01LW	AR60.00-P-0700-01LW

Check values for gap dimensions

Number	Designation			Model 205.3	Model 205.4
BE60.00-P-1004-01BB	Protrusion of radiator trim/soft nose, engine hood	Dimension "C"	mm	1 (1)	1 (1)
		For picture, see		AR60.00-P-0700-01LW	AR60.00-P-0700-01LW

Check values for gap dimensions

Number	Designation			Model 213.0/1	Model 213.2
BE60.00-P-1004-01GA	Protrusion of radiator trim/soft nose, engine hood	Dimension "C"		1 (1)	1 (1)
		For picture, see		AR60.00-P-0700-01LWE	AR60.00-P-0700-01LWE

Check values for gap dimensions

Number	Designation			Model 238.3	Model 238.4
BE60.00-P-1004-01HA	Protrusion of radiator trim/soft nose, engine hood	Dimension "C1"	mm	1,5 (1)	1,5 (1)
		For picture, see		AR60.00-P-0700-01LWO	AR60.00-P-0700-01LWO

Check values for gap dimensions

Number	Designation			Model 205.0/1	Model 205.2
BE60.00-P-1005-01BB	Engine hood to bumper	Dimension "D"	mm	4 (1)	4 (1)
		For picture, see		AR60.00-P-0700-01LW	AR60.00-P-0700-01LW

Check values for gap dimensions

Number	Designation			Model 205.3	Model 205.4
BE60.00-P-1005-01BB	Engine hood to bumper	Dimension "D"	mm	4 (1)	4 (1)
		For picture, see		AR60.00-P-0700-01LW	AR60.00-P-0700-01LW

Check values for gap dimensions

Number	Designation			Model 213.0/1	Model 213.2
BE60.00-P-1005-01GA	Engine hood to bumper	Dimension "D"	mm	3,8 (1)	3,8 (1)
		For picture, see		AR60.00-P-0700-01LWE	AR60.00-P-0700-01LWE

Check values for gap dimensions

Number	Designation			Model 238.3	Model 238.4
BE60.00-P-1005-01HA	Engine hood to bumper	Dimension "D"	mm	4,5 (1)	4,5 (1)
		For picture, see		AR60.00-P-0700-01LWO	AR60.00-P-0700-01LWO

Check values for gap dimensions

Number	Designation			Model 205.0/1	Model 205.2
BE60.00-P-1006-01BB	Bumper to headlamp	Dimension "E"	mm	2 (1)	2 (1)
		For picture, see		AR60.00-P-0700-01LW	AR60.00-P-0700-01LW

Check values for gap dimensions

Number	Designation			Model 205.3	Model 205.4
BE60.00-P-1006-01BB	Bumper to headlamp	Dimension "E"	mm	2 (1)	2 (1)
		For picture, see		AR60.00-P-0700-01LW	AR60.00-P-0700-01LW

Check values for gap dimensions

Number	Designation			Model 213.0/1	Model 213.2
BE60.00-P-1006-01GA	Bumper to headlamp	Dimension "E"	mm	2 (0,75)	2 (0,75)
		For picture, see		AR60.00-P-0700-01LWE	AR60.00-P-0700-01LWE

Check values for gap dimensions

Number	Designation			Model 238.3	Model 238.4
BE60.00-P-1006-01HA	Bumper to headlamp	Dimension "E"	mm	2 (0,5)	2 (0,5)
		For picture, see		AR60.00-P-0700-01LWO	AR60.00-P-0700-01LWO

Adjust front bumper

129 589 03 21 00

Feeler gauge

Henviste dokumenter

ad0000p200004b
ad0000p200006lwo
ar6000p070001lw
ar6000p070001lwe
ar6000p070001lwo
as0000z001101a Fare for personskade pga. fastklemning eller knusning af fingre ved af-, påmontering og indstillingsarbejde på motorhjelm og bagklap, døre, dæksler og soltag.