P88.10-2153-09
Shown on left side of vehicle and front wheel removed
4 Rear section, fender liner
5 Expansion rivet
6 Screw
1 Front section, fender liner
2 Line bracket
3 Nuts
| Remove/Install | ||
1 | Raise vehicle with lifting platform | ||
2.1 | Turn front wheels all the way to the left | Only when removing left front fender liner section (1). | |
2.2 | Completely turn front wheels to right | Only when removing right front fender liner section (1). | |
3 | Detach line holder (2) | Installation:Check line holder (2), replace if necessary | |
4 | Unscrew nuts (3). | ||
5 | Remove expansion rivets (5) | ||
6 | Unscrew bolt (6) | ||
7 | Loosen rear fender liner section (4) with mounting wedge | Loosen rear fender liner section (4) until front fender liner section (1) can be removed | |
| |||
8 | Remove front fender liner section (1) from front fender. | Installation: Ensure that front fender liner section (1) and rear fender liner section (4) are seated correctly | |
9 | Install in the reverse order |
Mounting wedge
110 589 03 59 00