W88.00-0001-06
1 Screw
2 Screw
3 Corner section
4 Screw
5 Connector for turn signal lamp
6 Screw
7 Lug
8 Mount
E18 Left turn signal lamp
E19 Right turn signal lamp
| Removal, installation | ||
1 | Open front flap | ||
2 | Remove turn signal lamp (E18, E19) | Installation: Insert retaining lug for turn signal lamp into mount in corner section. | |
3 | Disconnect connector (5) from turn signal lamp (E18, E19) | ||
4 | Unscrew screws (1, 4, 6) | ||
5 | Remove corner section (3) | Installation: First push mount on corner section over lug on A-pillar. Pull upper rubber lip over corner section. | |
6 | Install in opposite order |